KVASER
Single and multi-channel interfaces
for diagnostic, test bench and EoL applications
KVASER
Leaf v3
The Kvaser Leaf v3 is a high-speed interface with a CAN / CAN FD channel that can be connected to the computer’s USB port.
KVASER
U100
The Kvaser U100 is a high-speed interface with a CAN / CAN FD channel that can be connected to the computer’s USB port.
KVASER
USBcan Pro
The Kvaser USBcan Pro is a high-speed interface with multiple CAN / CAN FD channels that can be connected to the computer’s USB port.
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, Silver Snap-Tool, DiagRA® S, DiagRA® LE, DiagRA® X, DiagRA® Flash Station, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- USB A / CAN / CAN FD interface
- CAN 2.0 support
- Supports CAN FD up to 8 Mbit/s
- Supports silent mode for analysis tools
- 1 channel high speed
- Galvanically isolated
- Temperature range -20°C to +70°C
- Time resolution 50 microseconds
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
Leaf v3 OBDII
Connection to CAN: OBDII connector
Leaf v3 J1939-13 Type II
Connection to CAN: J1939-13 Type II connector
Leaf v3 D-SUB
Connection to CAN: 9-pin D-SUB connector
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, Silver Snap-Tool, DiagRA® S, DiagRA® LE, DiagRA® X, DiagRA® Flash Station, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- USB A / CAN / CAN FD interface
- CAN 2.0 support
- Supports CAN FD up to 8 Mbit/s
- 1 channel high speed
- Galvanically isolated
- IP67
- Temperature range -40°C to +85°C
- Time resolution 100 microseconds
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
U100-X3
Connection to CAN: OBDII connector
U100-X1
Connection to CAN: J1939-13 Type II connector
U100 D-SUB
Connection to CAN: 9-pin D-SUB connector
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, DiagRA® S, DiagRA® X, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- USB A / CAN / CAN FD interface
- CAN 2.0 support
- Supports CAN FD up to 8 Mbit/s
- Supports silent mode for analysis tools
- 2 / 4 / 5 channels high speed
- Galvanically isolated
- Temperature range -40°C to +85°C
- Time resolution 1 microsecond
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
USBcan Pro 2xHS v2
Connection to CAN: 2x D-SUB connectors
USBcan Pro 4xHS
Connection to CAN: 4x D-SUB connectors via HD26 to 4xDS9 splitter cable
USBcan Pro 5xCAN
Connection to CAN: 5x D-SUB connectors via HD26 to 5xDS9 splitter cable
KVASER
DIN Rail SE410S-X10
The Kvaser DIN Rail SE410S-X10 is a multichannel, programmable Ethernet-to-CAN/CAN-FD interface.
KVASER
PCIe / Splitter Cables
CAN multi-channel real-time CAN interface with multiple CAN/CAN FD channels.
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, DiagRA® X, DiagRA® Flash Station
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- Supports CAN FD, up to 8 Mbps
- Multi-channel CAN Ethernet interface
- Ethernet connection with Auto-MDIX via a shielded standard RJ45 connector
- Smart clip system for easy DIN rail mounting; no tools required
- 4 CAN/CAN FD channels
- Galvanically isolated CAN channels
- Requires a Class 2 / SELV +9 V to +35 V DC power supply
- Operating temperature range 5°C to 65 °C
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
No further information
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, Silver Snap-Tool, DiagRA® S, DiagRA® LE, DiagRA® X, DiagRA® Flash Station, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- PCI Express CAN interface
- Supports CAN FD up to 8 Mbit/s
- High-speed CAN connection (according to ISO 11898-2), up to 1 Mbit/s
- Galvanically isolated
- Temperature range -40°C to +85°C
- Time resolution 1 microsecond
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
Kvaser PCIEcan 2xCAN v3
Connection to CAN: 2-channel breakout cable
Kvaser PCIEcan 4xCAN v2
Connection to CAN: HD26-4xDS9 splitter cable, 30 cm
Kvaser PCIe 8xCAN
Connection to CAN: 2x HD26-4xDS9 splitter cables, 30 cm
KVASER
Leaf v3
The Kvaser Leaf v3 is a high-speed interface with a CAN / CAN FD channel that can be connected to the computer’s USB port.
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, Silver Snap-Tool, DiagRA® S, DiagRA® LE, DiagRA® X, DiagRA® Flash Station, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- USB A / CAN / CAN FD interface
- CAN 2.0 support
- Supports CAN FD up to 8 Mbit/s
- Supports silent mode for analysis tools
- 1 channel high speed
- Galvanically isolated
- Temperature range -20°C to +70°C
- Time resolution 50 microseconds
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
Leaf v3 OBDII
Connection to CAN: OBDII connector
Leaf v3 J1939-13 Type II
Connection to CAN: J1939-13 Type II connector
Leaf v3 D-SUB
Connection to CAN: 9-pin D-SUB connector
KVASER
U100
The Kvaser U100 is a high-speed interface with a CAN / CAN FD channel that can be connected to the computer’s USB port.
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, Silver Snap-Tool, DiagRA® S, DiagRA® LE, DiagRA® X, DiagRA® Flash Station, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- USB A / CAN / CAN FD interface
- CAN 2.0 support
- Supports CAN FD up to 8 Mbit/s
- 1 channel high speed
- Galvanically isolated
- IP67
- Temperature range -40°C to +85°C
- Time resolution 100 microseconds
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
U100-X3
Connection to CAN: OBDII connector
U100-X1
Connection to CAN: J1939-13 Type II connector
U100 D-SUB
Connection to CAN: 9-pin D-SUB connector
KVASER
USBcan Pro
The Kvaser USBcan Pro is a high-speed interface with multiple CAN / CAN FD channels that can be connected to the computer’s USB port.
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, DiagRA® S, DiagRA® X, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- USB A / CAN / CAN FD interface
- CAN 2.0 support
- Supports CAN FD up to 8 Mbit/s
- Supports silent mode for analysis tools
- 2 / 4 / 5 channels high speed
- Galvanically isolated
- Temperature range -40°C to +85°C
- Time resolution 1 microsecond
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
USBcan Pro 2xHS v2
Connection to CAN: 2x D-SUB connectors
USBcan Pro 4xHS
Connection to CAN: 4x D-SUB connectors via HD26 to 4xDS9 splitter cable
USBcan Pro 5xCAN
Connection to CAN: 5x D-SUB connectors via HD26 to 5xDS9 splitter cable
KVASER
DIN Rail SE410S-X10
The Kvaser DIN Rail SE410S-X10 is a multichannel, programmable Ethernet-to-CAN/CAN-FD interface.
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, DiagRA® X, DiagRA® Flash Station
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- Supports CAN FD, up to 8 Mbps
- Multi-channel CAN Ethernet interface
- Ethernet connection with Auto-MDIX via a shielded standard RJ45 connector
- Smart clip system for easy DIN rail mounting; no tools required
- 4 CAN/CAN FD channels
- Galvanically isolated CAN channels
- Requires a Class 2 / SELV +9 V to +35 V DC power supply
- Operating temperature range 5°C to 65 °C
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
No further information
KVASER
PCIe / Splitter Cables
CAN multi-channel real-time CAN interface with multiple CAN/CAN FD channels.
Technical details
Compatibility with RA products
DiagRA® D, Silver Scan-Tool™, Silver Snap-Tool, DiagRA® S, DiagRA® LE, DiagRA® X, DiagRA® Flash Station, DiagRA® Embedded
Applications
Measurement, calibration, diagnostics, simulation, flashing of vehicles, off-road equipment and machinery, test benches, HiL
Product specifications
- PCI Express CAN interface
- Supports CAN FD up to 8 Mbit/s
- High-speed CAN connection (according to ISO 11898-2), up to 1 Mbit/s
- Galvanically isolated
- Temperature range -40°C to +85°C
- Time resolution 1 microsecond
- In addition to the standard driver, an SAE J2534 (PassThru) driver is included.
Variants
Kvaser PCIEcan 2xCAN v3
Connection to CAN: 2-channel breakout cable
Kvaser PCIEcan 4xCAN v2
Connection to CAN: HD26-4xDS9 splitter cable, 30 cm
Kvaser PCIe 8xCAN
Connection to CAN: 2x HD26-4xDS9 splitter cables, 30 cm
Leaf Light HS v2
KVASER
Adapter Cable OBDII
KVASER
Adapter Cable J1939-13 Type II
KVASER
HD26-4xDS9 Splitter 30 cm
KVASER
DS9-2xDS9 Splitter 30cm
KVASER