I+ME Actia
offers high-quality communication interfaces used by many users in combination with our products.
Basic+ XS
Product Description
The Basic + XS from I + ME Actia is a combined K-Line / CAN interface. The connection to the measuring computer is made via a 9-pin RS-232 plug to the serial port or via the supplied USB connector to the USB port. A connection cable with an OBD plug is available for vehicle bus connection.
It is supported by our products DiagRA® D, DiagRA® X, DiagRA® LE, and Silver Scan-Tool ™.
With a corresponding, optional driver, the Basic + XS can also be used as a PassThru device.
Technical specifications
Optional serial or USB connection (included)
CAN 2.0B ISO 11898
CAN transfer rate up to 1 MBit/s
K-Line ISO 9141 (100 mA)
K-Line ISO 14230 (KWP2000)
On-Board 16 bit micro-controller
Weight 200g
For 12V or 24V operating voltage
Lite XS
Product Description
The Lite XS® from I + ME Actia is a combined K-Line / CAN interface. The connection to the measuring computer is made via the USB port (USB2.0). The electronics are integrated in the OBD connector. All inputs and outputs of the Lite XS® to the PC are galvanically isolated. This capacitive decoupling of the Lite XS® ensures higher interference immunity and faster data transfer than the commonly used optocouplers.
It is supported by our products DiagRA® D, DiagRA® X, DiagRA® LE, and Silver Scan-Tool ™.
With an optional driver, the Lite XS® can also be used as a PassThru device.
Technical specifications
Compact design
Inputs and outputs galvanically separated
Firmware update possible directly from the PC
Power supply via the USB port
High performance at a fair price
1 CAN channel 2.0A and 2.0B, ISO 11898
2 K-Line channels ISO 9141 (100mA)
Vehicle voltage 8… 32V
Cable length 2.3m