DiagRA® Embedded
Our solution for location-independent diagnostics and flashing.
DiagRA® Embedded
DiagRA® Embedded lets you run complete diagnostic and flashing services on all devices, both Windows and Linux-based. Diagnose and flash control devices not only from your desk but also in the field. Control your service either natively with the C++ API or remotely via a web service interface.
Your Benefits
Make use of all the advantages – wherever you are. With our C++ based runtime function library you can use DiagRA® Embedded on almost every Linux and Windows device.
Platform Independence
No restrictions due to the given platforms.
C++ API
Implement your service natively with the C ++ API.
WebServices
Control via SOAP and ReST web services.
Platform independence advantage
DiagRA® Embedded is compatible with Linux and Windows, so you can use the software in any use-case on almost any device. Save yourself unnecessary test drives by flashing the control units with a different variant during the same test drive. You can call up and carry out all diagnostic and flash functions while in the field, using your smartphone or automated, using the C++ API interface.
Feature Overview
DiagRA® Embedded is a diagnostic tool that’s ideal for mobile use.
Mobile Device Diagnostics
DiagRA® Embedded lets you run diagnostics and flash functions for mobile devices.
ECU Flash Programming
DiagRA® Embedded offers complete flash programming for almost all ECUs.
OBD Scan-Tool
Includes a fully integrated OBD scan tool for OBDII, EOBD, HD-OBD, WWH-OBD.
Platform Independence
DiagRA® Embedded is fully compatible with Linux and Windows.
UDS Support
Supports the Unified Diagnostic Services Protocol (UDS) according to ISO 14229.
C++ API
DiagRA® Embedded can be integrated into your respective process via a C++ API.
WebServices SOAP, ReST
Control all functions via SOAP and ReST web services.
Low Memory Requirements
DiagRA® Embedded requires very little RAM, so it can be used on all devices.
DiagRA® Embedded Supports:
| Standards | SAE J1979, SAE J1939, ISO 27145, ISO 14229 |
| Interfaces | SocketCAN, PEAK, Kvaser, SAE J2534 PassThru, RP1210 |
| Physical Connection | CAN, CAN FD |
| Flash Formats | HEX/S19, ODX, PDX |
DiagRA® Embedded
the diagnostic and flash tool, for diagnostic applications on Linux and Windows devices.
Technical Specification
| Standards | SAE J1979, SAE J1939, ISO 27145, ISO 14229 |
| Interfaces | SocketCAN, PEAK, Kvaser, SAE J2534 PassThru, RP1210 |
| Physical Connection | CAN, CAN FD |
| Flash Formats | HEX/S19, ODX |
| System requirements Linux from Kernel 4.4 | Processor: ARM 32/64 bit, Intel 32/64 bit Main memory: from 512 MB Hard disk: 512 MB (developer version), 30 MB (application via web services, e.g. Flashhub) Interface: SocketCAN-compatible interface (Kvaser, PEAK, …) Developer version: cmake 3.8.2 or higher; Windows: Visual Studio 2013, 2015, 2017 or 2019; Linux: GCC 4.9 or later |
| System requirements from Windows 7 | Processor: Intel 32/64 bit Main memory: from 4 GB Hard disk: 512 MB (developer version), 30 MB (application via web services, e.g. Flashhub) Interface: Kvaser, PEAK, Passthru Developer version: cmake 3.8.2 or higher; Windows: Visual Studio 2013, 2015, 2017 or 2019; Linux: GCC 4.9 or later |
Trainings
Training: DiagRA® D12. December 2020 - 13:50- Training: ODX for Diagnostics Developers10. December 2020 - 9:32
- Customized Training10. December 2020 - 9:22
Latest News
- OSAR Conference Riverside/CA, USA21. February 2023 - 10:47
- OBD Symposium in Prague16. February 2023 - 9:51
- Official certification of our Silver Snap-Tool by CARB9. September 2022 - 15:11
News Story DiagRA Embedded
Our DiagRA Embedded component provides a complete diagnostic stack as well as ECU flash programming on both Windows and embedded Linux devices. As a component library, it provides a C/C++ API. As a standalone version it is available with an integrated web server providing ReST and SOAP APIs. The following diagnostic standards are currently supported: […]