The Bacic+ XS® from I+ME ACTIA is a combined K-Line/CAN interface. It can be connected to the pc via a 9-pin RS-232 plug to the serial port or via the inlcuded USB-connector to the USB port. To connect the interface to the vehicles bus network a connection cable with an OBD plug is available. The Basic+ XS® is beeing supported by our DiagRA® MCD Toolset, Silver Scan-Tool™ and DiagRA® LE.

With an additional driver for the Basic+ XS® it can be used as a PassThru-Device.

Technical Data:

• USB and serial connection possible (cables included)
• CAN 2.0B ISO 11898
• CAN transfer rate up to 1 MBit/s
• K-Line ISO 9141 (100 mA)
• K-Line ISO 14230 (KWP2000)
• on-board 16 bit micro-controller
• Weight 200g
• For 12V or 24V operating voltage